How to Use Powermatic 4 Plus Electric Injector

Quick answer

To use the Powermatic 4 Plus electric injector, load tobacco into the chamber, insert an empty tube, and press the button. The motor packs the cigarette for you in seconds.

Step-by-step instructions

1. Prepare the tobacco: Spread your tobacco evenly on a tray. Remove any stems or clumps. Slightly moist tobacco (not wet) packs better and reduces dust. Tobacco that is too dry will result in loose cigarettes; too moist may clog the machine.
2. Load the chamber: Open the hopper on top of the Powermatic 4 Plus. Fill it with tobacco, but do not overpack. Gently tap the hopper to settle the tobacco. Overfilling can jam the mechanism. Start with a moderate amount and adjust based on your preferred density.
3. Insert the cigarette tube: Take an empty 100mm tube and place the open end onto the metal nozzle. Push it on until it stops—do not force it. If the tube does not slide on easily, check that you are using the correct size. Forcing it can tear the tube.
4. Inject the cigarette: Press and hold the power button. The motor will push the tobacco into the tube. Release the button once the tube feels full. Remove the finished cigarette. Hold the button only until the tube is full. Holding longer may overpack or cause the tube to split.
5. Inspect and repeat: Check the cigarette for even fill. If it is loose, add a bit more tobacco next time. If it is too tight, use less. Repeat the process for your desired quantity. The first few cigarettes may vary. Adjust the tobacco amount until you find the sweet spot for your preferred draw.

Product used in this guide

• Powermatic 4 Plus Electric Cigarette Injector Machine: The Powermatic 4 Plus Electric Cigarette Injector Machine features a powerful motor and user-friendly design for effortless cigarette rolling. This means you can produce consistent, well-packed cigarettes quickly, even if you are new to rolling your own.